Відео

My tab broke on the connector, wtf do i do 😢

Living the CZ life 😎

Great Job!! You can do it without removing the tire with a good 90 power ratchet.. one other thing worth noting is that there is actually a white filter at the base of the pump.. it may come out with the pump .. if so you may need to use it in your aftermarket pump.. as well as the 90degree elbow to the rubber water line.

What is inner section ? High Beam ?

Perfecto video ...inmejorable!!!

I’m looking to buy this gun for $375 is that a good deal ?

Dream engine, how's maintaining it?

what product do you use to lube the o-rings?

My 14mm wouldn’t fit. what was the exact socket you used.

Very usefull thank you for the tutorial sir!!!

there’s nothing on the paper towel? just plain.

Is it the same for a 5 series. ? I have a 2014 528 i xdrive ..

Thank you for this, my Mondeo's headlights got water in them so needed to know how to remove them, thanks DIY!

Great job, thanks a lot 😊👍💯

1bulb for 2 rings right ?

Great video very helpful for us mondeo owners thank you

My bulb will not turn for the life of me and I am getting real pissed off real quick

Today i bought this car. I made an oil change like you. I filled 5.5 liter engine oil and started the car. After checked the oil level and it was very high. i drained 0.5 liter but is still high. I dont understand it.

i miss your bmw DIY videos no one does it better than you man

Thats great. Thanks for the tutorial. I have a dead wide bulb i have to change. Also on the same side the main hulb only comes out n after i tive it a bunp on yhe outaide. I hope its just a loose connection.

Hi there im not sure if you still work on ur e60 bmw 530i but im having some problems with my ignition and was wondering if u knew how to fix it, I currently cannot insert my key into my ignition at all, Have u ever had this problem?

Whatever you do, NEVER mention which BMW model this is....leave everyone guessing

Hey @DIYProjectX, thanks for a great video. Can you tell me which diagnostic tool do you use to read the transmission oil temperature? I have an OBD adapter with the bimmer link app and this is the only data I cannot get.

Don’t need to take wheel off btw 😊

Thank you for this Video 🙏 i really apreciate your work 💯

Is the same with nfl e60? Help me pls

I had problems jacking up the Mondeo IV. Now I have a 11 cm u- profile and put this on top of the jack, then I place it under the seam. So the seam will not be damaged.

Good job

Awesome video mate, very helpful and spot on. After letting it drain with the cover off for a couple of hours, I was able to initially add about 3.5 litres of oil. Then after running the car and going through the gears a fair bit, I was able to add another 2 litres. So 5.5 litres all up for me.

this bulb is not for rings

I noticed the light didn't stay illuminated after installation. It illuminated intermently is that to be expected after new install?

Bu siralama nedi kod nedi

Great video. Helped me out a lot.

Great tutorial my friend. A month ago i watched another tutorial and it helped a little bit when i changed the light bulb but it didn’t show the tricks that you used. I spent 40 mins changing the light bulb because it was hard to get it out and even harder to get it back in. It sucks that i first connected the light bulb and then put it in its place that’s why the light bulb was a little bit off when i drove the car. Today i had some time to finally put the light bulb correctly and did it in 10 minutes with the help of your tricks. Thanks again for the tricks and the tutorial

Can i do this with the low beam bulbs? Or do i need to remove the whole assembly?

Perfect, thanks you, great music too 😊🌈

So many thanks for posting this - you saved my NYE! I found the hardest part reseating the unit - being winter I was paranoid I might split the plastic bumper grille but mercifully I didn't (wonder how many new ones Ford have happily supplied!). Also lucky that the failed dip beam bulb was a standard H7 55W for which I had a spare.

Thanks for this! Watched the video once and managed to change the bulb under 10 minutes without a hitch :) would be a real hustle without your tips.

tak a temperatura silnika pokazuje ze rozgrzny byl

❤ danke

Top

It’s my first time doing a oil change and this is the best successful tutorial ever.

Can you clarify what an H8 socket is? I found the torx t30 screw driver online but have no idea what an H8 socket is.

Simple thanks

1:24-1:59-2:35-3:03-3:58

The connections at 02:05 are not on my headlamp - all I can see are some posts - why is this?

relly hope my i just need to change this now. thx!

Thank you for this. I've just changed both of my headlamps and there's no way I would have been able to remove the headlamp casing without the 'trick' with the inside corner. You've just saved me a painful trip to Halfords and £18!

My 2008 failed Inspection. The Check Engine light came on when my pump stopped working. Will the Check Engine light disappear after the pump is replaced?

Huge thanks for this - only took me 5 mins once I knew to pull the lower corner into the engine compartment a bit. (Feel chuffed with my little self now).